|
Material properties | Technical Data | Fields of application | Delivery programme | Material safety data sheet | Chemical Resistance
Murylat® / Murylat® SP
Material Characteristics
|
Characteristics at a glance
good slide and wear properties
high creep resistance even at higher temperatures
very good dimensional stability
high dynamic load-bearing capacity
good dimensional stability
good UV resistance
low moisture absorption
approved for contact with food
|
 |
 |
Murylat® and Murylat® SP are part-crystalline plastics suitable for precision parts with good dimensional stability. Due to their very high hardness, they tolerate extreme stresses in static and dynamic applications.
Slide and wear properties
Modified with lubricants, the original Murylat becomes Murylat® SP and, as such, an ideal material for applications requiring good slide and wear properties. Compared to Murylat, Murylat® SP shows lower wear resistance, a lower sliding friction coefficient and higher dynamic stress resistance. Its good slide properties significantly reduce the driving power requirements at your plant and avoid stick-slip.
Creep resistance
Murylat® and Murylat® SP offer high creep resistance even at higher temperatures, making component installation more economical since no additional metal casings are needed.
Dimensional stability
Good dimensional stability for machined components, together with low moisture absorption and a low thermal expansion coefficient, permit a universal range of applications.
UV resistance
Murylat® and Murylat® SP feature good UV resistance and low moisture absorption, which is also why they can in principle be used outdoors. Nor, in contrast to metal components, is there any need for costly surface protection.
Contact with food
Murylat® and Murylat® SP are approved for direct contact with food (EU directive and FDA) and are physiologically safe.
|
